If you are unfortunate enough to find a problem with mold growth in your home is it in your basement, attic, or on the walls of your bedroom, you must deal with the problem promptly. While small spots of mold can be treated using the DIY method, large areas should be assessed and treated professionally because of the potential health risks involved.
To determine the types of molds available and the types of repairs to be made, you must have a mold testing/mold inspection carried out by a qualified professional such as O2 Mold Testing.
So, what is mold inspection?
A mold inspection will identify conditions around your property such as mold growth as well as pinpoint problem areas such as water damage, odor and obvious signs of mold growth, etc. The mold inspector should carry out an outside inspection and inspect the outside of the residence again for signs of water damage, leaks, and obvious sources such as broken pipes, broken gutters, cracked brickwork, and so on.
Want to know the price? Also read the mold inspection cost guide
What Is Done During A Mold Inspection?
After an initial visual inspection, the first job that O2 Mold Testing performs is usually measuring the level of moisture present on the property walls. Humidity levels are measured at intervals of about two feet and special attention should be paid by inspectors in the area under the sink, around the water heater, wherever there is a source of water. The acceptable rate is 15% or below.
Sampling is very important when there is damage to the water and its growth is increasing. The sample taken is most likely an air sample. By taking air samples during a mold inspection, it is possible to determine what type of mold is in the atmosphere and in what quantity. The mold inspector must take at least two air samples. The first must be from the area of concern and the second must be from outside.
Why take samples from outside? The answer to this is easy. Mold is found everywhere, we inhale it all the time and most of it is 100% safe and does not harm us anything. Thus, during an inspection, it must be determined whether the mold inside has the same strain as the outside and if the ratio is equal or less. The flip side of the coin is clear that the mold type may be the same but the concentration is much higher in the mold or it may be toxic.
Reasons To Seek Mold Inspection Service
Do we see and feel the mold is all around us. Mold can cause allergens that can cause health problems for humans and their pets. Since their spores cannot be seen with the naked eye, it is almost impossible to detect them in the air. Luckily, there’s a way to find out, you’ll need a mold testing professional like mold testing in Dallas, TX.
When Should You Seek Mold Inspection Service?
Mold Surface Growth
Molds may not be visible while floating, when they land on a wet surface and start growing, they are hard to miss. Mold in size, shape, and color, always looks dirty and unhealthy. Because it needs moisture to survive, Mold often appears and feels slimy. At times like this, a mold inspector like O2 Mold Testing is needed.
Before becoming visible, molds make their presence known by an unpleasant odor. Unsurprisingly, a “musty” or “stale” smell is a top reason homeowners call a mold inspector company.
Previous Pipe Leak
Because mold needs water to survive, levels are often in unhealthy ranges indoors. The only exception is when there is a pipe leak that attracts the floating mold. It doesn’t matter where the leak is in the basement, wall, or floor the mold will show up there.
While generally harmless outdoors, when mold is confined indoors, allergic reactions are quite common. This is especially true for children and people with breathing problems. According to reliable estimates, about one in every three children is allergic to mold, making it the most common allergen after pollen. But because the symptoms of exposure are fairly common (coughing, sneezing, eye irritation, runny nose, etc.), most homeowners don’t pinpoint the cause for months. A good rule of thumb is to do mold testing if common allergy symptoms seem to be getting worse in your home.
No matter how well you take care of your home, water damage is unavoidable over a long period. And whether it strikes the ceiling, under cabinets, or in the basement, there’s a high chance that mold will grow. Again, it may not look, smell good, or go undetected, but mold can cause problems for its current and future occupants. No wonder most homeowners ask for mold testing before selling their homes.
If you suspect lice for any of the reasons listed above, contact an O2 Mold Testing company immediately.
Why Choose O2 Mold Testing For mold inspection
Professional companies like O2 Mold Testing offer mold testing services. To get the best return on your money invested, it is necessary to choose a mold inspection company carefully, Therefore O2 Mold Testing is a must-try. The following points can be used as guidelines for O2 Mold Testing:
• O2 Mold Testing is a customer-focused company on unique and individual needs.
• O2 Mold Testing company that uses the latest know-how such as microbiological testing, air testing, humidity testing, HVAC reports, leak inspections, and so on.
• O2 Mold Testing is aware of the health hazards associated with their work and pays sufficient attention to personnel protection and other safety issues associated with a mold inspection.
How Fast Can You Expect Results?
As a rule of thumb, these samples can take 3-4 days to process in the lab. You should expect the mold inspector to contact and provide an oral mold testing report as soon as the results are available followed by a written report in a few days. An additional point to note, when it comes to reports after mold testing, a good mold inspector will not just send you a copy of the lab report. He or she should be able to confidently interpret the results and present them along with recommendations for solving simple problems!
O2 Mold Testing
Address: 1400 Hi Line Dr, Dallas, 75207
Phone: (469) 646-6789